Suburban PGE / Walk-behind / LB256S
  1. How to change the oil using an oil pump
  2. How to modify the oil past leaning your lawn mower
  3. Recommended products

How to change the oil in your Husqvarna lawn mower

Change the oil after every 25 hours of functioning or each season. Y'all may need to change the oil more than oftentimes nether dusty, dirty conditions. There are two means of draining the oil, both shown in this video.

Before tipping the lawn mower to drain oil, empty the fuel tank by running the engine until the fuel tank is empty.

How to change oil in your lawn mower 2m15s 16:9 MASTER

How to change the oil using an oil pump

  1. Disconnect the spark plug wire from the spark plug and place the wire where information technology cannot come into contact with the plug
  2. Remove the engine oil cap/dipstick; lay aside on a clean surface
  3. Utilize a pump to empty the oil. Clean the mouth piece when y'all take finished to avoid oil spillage
  4. Bank check that all the oil is removed using the dipstick
  5. Refill the oil in accordance to the oil and corporeality specified in your user manual
  6. Use the dipstick to check the amount of oil is correct

How to change the oil by leaning your lawn mower

  1. Empty the fuel tank by running the backyard mower until no petrol remains
  2. Disconnect the spark plug wire from the spark plug and identify the wire where it cannot come up into contact with the plug
  3. Remove the engine oil cap/dipstick; lay aside on a clean surface
  4. Put a jar at a suitable distance from the lawn mower
  5. Tip the lawn mower towards the jar so that the air filter is the highest point
  6. Make clean up any oil spillage
  7. Use the dip stick to check that all oil is removed
  8. Refill the oil in accordance to the oil and amount specified in your user manual
  9. Use the dipstick to check the amount of oil is correct

Related articles